1.Wire winding:Wind the wire around the stator core of the motor according to a specific number of turns.
2.Wire embedding:Connect the power leads and other wires to the corresponding terminals of the stator winding.
3.Coil Inspection:Perform electrical testing on the stator coils
4.Pump Installation:Complete the integration of mechatronics to form a complete water pump
5.Spray Painting:Apply a coating to the pump motor housing
6.Wiring:Install the terminal block and junction box cover, and connect the external power wires.
7.Air Tightness Test:Test the sealing parts of the water pump (especially the mechanical seal)
8.Performance Testing:Conduct a simulation test on the water pump, mainly testing (flow rate and head).
9.Laser Engraved Nameplate:Install labels to achieve product traceability
10.Packaging:Package the qualified products
11.Shipment:Transport the packaged products to customers through logistics channels
12.Service:Provide after-sales services, such as installation guidance, technical support, warranty, and repairs.
